Bridging The GAP
PRODUCTS
The World Of Opportunities
Our products are categorized as STANDARD and CUSTOMIZED. Standard products are channeled through our TRADING& DISTRIBUTION vertical and customized products are channeled through our PROJECT vertical.
DPF CLEANING MACHINE
Diesel Particulate Filters are made of a porous ceramic honeycomb of alternate end closed channels. The exhaust gas enters the DPF and passes through the porous walls of these channels and traps the particulate matter.
Particulate matter (or PM) in the DPF is made up of soot and ash. Soot is normally removed from the DPF through regeneration, but leaving the ash behind in the channels.
In some cases, ash bridging may also occur causing blockages to form near the middle of the filter, effectively blocking flow through the remainder of the channel.
Ash, by definition is incombustible and must be removed from the DPF through an effective cleaning process.
Ash build-up is the primary reason for premature DPF failure and is the most important factor controlling the service life of the filter.
Ash and soot accumulation restricts exhaust flow, therefore increasing back pressure, making it harder for the engine to breathe. This can greatly affect performance and fuel consumption.
When the filter is blocked, options such as forced regeneration or chemical additives will only remove some of the soot, but not the ash.
If high ash levels remain, this will, at best, only be a short-term solution and therefore a potential waste of time and money.
DPF’s can be restored to virtually new condition by thorough cleaning, removing both soot and ash, as well as recovering DPF’s with oil and coolant contamination.
CUSTOMIZED TESTRIG
Customized testrigs from concept generation till delivery at customer door step is our responsibility. We work along with our creative designers and highly capable suppliers from different areas of expertise to fulfill the testing, validation and measurement requirement of our clients by creating marvelous pieces of machinery.